How to Recondition a Car Battery at Home

On the off chance that your vehicle’s battery isn’t holding a charge or generally isn’t adequate, you might most likely fix it. The most widely recognized reason for corrupted battery execution in lead-corrosive batteries is sulfation, which happens when sulfur gathers on the lead plates in the battery, hindering the electric flow. It’s not hard to recondition a vehicle battery at home. Be that as it may, sulfation causes irreversible consumption of the lead plates, so this procedure will work just three to multiple times.

Stage 1

Test the battery to check whether it is probably going to react to reconditioning; it needs to enlist 12 volts on a voltmeter. On the off chance that it’s somewhere in the range of 10 and 12 volts, you might almost certainly reestablish the battery to full capacity, yet in the event that it tests at under 10 volts, you’re likely squandering your time.

Stage 2

Warmth a half quart of refined water to 150 degrees F, and break down 7 or 8 oz. of Epsom salts in the water.

Stage 3

Evacuate the battery cell tops. In the event that you have a fixed battery, discover the “shadow plugs” that spread openings to the battery cells- – you’ll have to bore through these.

Stage 4

Channel any liquid out of the battery and utilize a plastic pipe to pour enough of the Epsom salt arrangement in to fill every cell of the battery legitimately.

Stage 5

Supplement plastic attachments in the drill gaps or supplant the battery tops and shake the EZ Battery Reconditioning to ensure the Epsom salts arrangement is all around appropriated.

Revive the battery on a moderate charge for 24 hours and after that re-introduce it in your vehicle.


Put the battery on the charger for three or four evenings to reestablish it to most extreme limit.

To limit loss of execution, put vehicle batteries on a stream charger in the event that you won’t utilize them for a little while or more. A put away battery progressively loses its charge, enabling sulfur to shape on the lead plates.


Vehicle batteries contain sulfuric corrosive, which is among the most dominant of corrosive mixes. Work just in a well-ventilated zone and don’t have open blazes close-by. Wear security goggles and elastic gloves. In the event that you get corrosive on your skin, inundate it with water right away.

Try not to utilize faucet water since it contains synthetic substances that will harm a battery.

Things you will require

Epsom salts (magnesium sulfate)

Refined water

Plastic channel

Security goggles

Elastic gloves


Battery charger

Drill (for fixed batteries)

Plastic attachments (for fixed batteries)

Leave a Reply

Your email address will not be published. Required fields are marked *

error: Content is protected !!